The SYSTEM Sub-Menu (KLANG:fabrik only)
– KLANG:fabrik only – Change the input/output channel count according to your needs.
Clock Speed Mode
Three different settings are available.
- Single for 44.1&48kHz sampling rates
- Single w EQs for 44.1&48kHz sampling rates with EQ feature activated
- Double for 88.2&96kHz sampling rates
This setting has an impact on the IO channel count.
Number of Outputs
You can change the Number of Outputs i.e. number of mixes or users, according to your needs. Once the number of users is adjusted, click and hold RESTART for 3 seconds, otherwise the settings will not be transmitted! Your KLANG unit will then proceed a short soft restart with the adapted number of mixes. You can still load your presets. If you load a preset for more users and less channels than your current setting, new channel information will be added at the end of the channel list. The same holds for users. Hence, new users with empty channel information will be added at the end of the user list.
The input channel count depends on the number of mixes, the sample rate and the EQ setting as follows:
Please note: when cascading KLANG units the number of mixes can be increased. The number of input channels does not increase per se.
Example: You are using 1 x KLANG:fabrik in the configuration of 8 mixes of 24 inputs (48kHz, without EQs). When you need 48 inputs, you can chance the IO configuration of KLANG:fabrik to 4 mixes of 48 inputs (48kHz, without EQs). With a second KLANG:fabrik you can get 4 additional mixes of 48 input channels with the same IO configuration. So indirectly the number of input channels was increased by cascading two units, but through changing the IO configuration in the first place.
MADI port 2
The second MADI BNC port is by default set as an output. It can be switched to a second input port by software. Depending on this setting the routing screen will show two input ports or an input and and output MADI port.
Even if the restart button is not shown, it is there an can be used to restart the unit. Make sure to click and hold the button for 3 seconds. The unit will perform a soft restart that usually takes less than 10 seconds.